View AZP96NG_1215199.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AZP96
FEATURES
* * * * * * Green and RoHS Compliant / Lead (Pb) Free Package available 250ps Propagation Delay High Bandwidth Output Transitions Operating Range of 3.0V to 5.5V Minimized Input Loading IBIS Model File Available on Arizona Microtek Website PACKAGE
MLP 8 (2x2) Green / RoHS Compliant / Lead (Pb) Free
1 2
ARIZONA MICROTEK, INC.
ECL/PECL Differential Receiver
PACKAGE AVAILABILITY PART NUMBER
AZP96NG
MARKING
Q1G
NOTES
1,2
Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape & Reel. Date code format: "Y" for year followed by "WW" for week.
DESCRIPTION
The AZP96 is a differential receiver without the input clamping networks found on similar devices such as the AZ100LVEL16. This makes it especially useful as a buffer when input loading effects must be minimized. Removal of the input clamping network means that the output state will be undefined if both inputs are left open. The AZP96 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device. For single-ended input applications, the VBB reference should be connected to one side of the D/D differential input pair. The input signal is then fed to the other D/D input. The VBB pin can support 1.5 mA sink/source current. When used, the VBB pin should be bypassed to ground via a 0.01 F capacitor. NOTE: Specifications in the ECL/PECL/LVPECL tables are valid when thermal equilibrium is established.
AZP96N MLP 8, 2x2 mm PIN DESCRIPTION PIN D, D Q, Q VBB VCC VEE NC FUNCTION Data Inputs Data Outputs Reference Voltage Output Positive Supply Negative Supply No Connect
NC D D VBB 1 2 3 4 8 7 6 5 VCC Q Q VEE
TOP VIEW Bottom Center Pad may be left open or tied to VEE.
1630 S. STAPLEY DR., SUITE 127 * MESA, ARIZONA 85204 * USA * (480) 962-5881 * FAX (480) 890-2541 www.azmicrotek.com
AZP96
Absolute Maximum Ratings are those values beyond which device life may be impaired.
Symbol VCC VI VEE VI IOUT TA TSTG Characteristic PECL Power Supply (VEE = 0V) PECL Input Voltage (VEE = 0V) ECL Power Supply (VCC = 0V) ECL Input Voltage (VCC = 0V) Output Current --- Continuous --- Surge Operating Temperature Range Storage Temperature Range Rating 0 to +8.0 0 to +6.0 -8.0 to 0 -6.0 to 0 50 100 -40 to +85 -65 to +150 Unit Vdc Vdc Vdc Vdc mA C C
100K ECL DC Characteristics (VEE = -3.0V to -5.5V, VCC = GND)
Symbol Characteristic
1
VOH Output HIGH Voltage VOL Output LOW Voltage1 VIH Input HIGH Voltage VIL Input LOW Voltage VBB Reference Voltage Input LOW Current IIL Input HIGH Current 50 IIH IEE Power Supply Current 18 22 1. Each output is terminated through a 50 resistor to VCC - 2V.
Min -1085 -1830 -1165 -1810 -1380 0.5
-40C Typ -1005 -1695
Max -880 -1555 -880 -1475 -1260
Min -1025 -1810 -1165 -1810 -1380 0.5
0C Typ -955 -1705
Max -880 -1620 -880 -1475 -1260 50 22
Min -1025 -1810 -1165 -1810 -1380 0.5
25C Typ -955 -1705
Max -880 -1620 -880 -1475 -1260 50 22
Min -1025 -1810 -1165 -1810 -1380 0.5
85C Typ -955 -1705
Max -880 -1620 -880 -1475 -1260 50 24
Unit mV mV mV mV mV A A mA
18
18
18
100K LVPECL DC Characteristics (VEE = GND, VCC = +3.3V)
Symbol Characteristic
1,2
VOH Output HIGH Voltage VOL Output LOW Voltage1,2 VIH Input HIGH Voltage1 VIL Input LOW Voltage1 VBB Reference Voltage1 Input LOW Current IIL IIH Input HIGH Current 50 50 IEE Power Supply Current 18 22 18 22 1. For supply voltages other that 3.3V, use the ECL table values and ADD supply voltage value. 2. Each output is terminated through a 50 resistor to VCC - 2V.
Min 2215 1470 2135 1490 1920 0.5
-40C Typ 2295 1605
Max 2420 1745 2420 1825 2040
Min 2275 1490 2135 1490 1920 0.5
0C Typ 2345 1595
Max 2420 1680 2420 1825 2040
Min 2275 1490 2135 1490 1920 0.5
25C Typ 2345 1595
Max 2420 1680 2420 1825 2040 50 22
Min 2275 1490 2135 1490 1920 0.5
85C Typ 2345 1595
Max 2420 1680 2420 1825 2040 50 24
Unit mV mV mV mV mV A A mA
18
18
100K PECL DC Characteristics (VEE = GND, VCC = +5.0V)
Symbol Characteristic VOH Output HIGH Voltage1,2 VOL Output LOW Voltage1,2 VIH Input HIGH Voltage1 VIL Input LOW Voltage1 VBB Reference Voltage1 Input LOW Current IIL IIH Input HIGH Current 50 50 IEE Power Supply Current 18 22 18 22 1. For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value. 2. Each output is terminated through a 50 resistor to VCC - 2V. Min 3915 3170 3835 3190 3620 0.5 -40C Typ 3995 3305 Max 4120 3445 4120 3525 3740 Min 3975 3190 3835 3190 3620 0.5 0C Typ 4045 3295 Max 4120 3380 4120 3525 3740 Min 3975 3190 3835 3190 3620 0.5 25C Typ 4045 3295 Max 4120 3380 4120 3525 3740 50 22 Min 3975 3190 3835 3190 3620 0.5 85C Typ 4045 3295 Max 4120 3380 4120 3525 3740 50 24 Unit mV mV mV mV mV A A mA
18
18
April 2007 * REV 1
www.azmicrotek.com 2
AZP96
AC Characteristics (VEE = -3.0V to -5.5V; VCC = GND or VEE = GND; VCC = +3.0V to +5.5V)
Symbol tPLH / tPHL Characteristic Min -40C Typ Max Min 0C Typ Max Min 25C Typ Max Min 85C Typ Max Unit ps ps mV V ps Propagation Delay to Output (Diff) 125 250 375 175 250 325 175 250 325 205 280 355 (SE) 75 250 425 125 250 375 125 250 375 155 280 405 tSKEW Duty Cycle Skew 1(Diff) 5 5 20 5 20 5 20 VPP (AC) Minimum Input Swing2 150 150 150 150 Common Mode Range3 VEE + VCC - VEE + VCC - VEE + VCC - VEE + VCC VPP < 500mV 1.2 0.4 1.1 0.4 1.1 0.4 1.1 0.4 VCMR 1.5 0.4 1.4 0.4 1.4 0.4 1.4 0.4 VPP 500mV Output Rise/Fall Times Q tr / t f 100 260 100 260 100 260 100 260 (20% - 80%) 1. Duty cycle skew is the difference between a tPLH and tPHL propagation delay through a device. 2. VPP is the minimum peak-to-peak differential input swing for which AC parameters are guaranteed. The device has a DC gain of 40. 3. The VCMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPP(min) and 1V.
April 2007 * REV 1
www.azmicrotek.com 3
AZP96
Recommended Circuit for Single-Ended Input Limiting Applications
April 2007 * REV 1
www.azmicrotek.com 4
AZP96 PACKAGE DIAGRAM MLP 8 2x2mm
Pin 1 Dot By Marking 2.0000.050
2.0000.050
MLP 8 (2x2mm)
TOP VIEW
0.3500.050 0.2500.050 8 7 0.500 bsc 6 5 1
Pin 1 Identification R0.100 TYP
2 1.2000.050 exp. pad 3 4 0.6000.050 exp. pad
BOTTOM VIEW
1.750 Ref.
0.7500.050 0.000-0.050
1
2
34 0.2030.025
SIDE VIEW
Note: All dimensions are in mm
April 2007 * REV 1
www.azmicrotek.com 5
AZP96
Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part.
April 2007 * REV 1
www.azmicrotek.com 6

▲Up To Search▲

Price & Availability of AZP96NG

	To Download AZP96NG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .